Software
Name
Version
Seq firmware
2.2.6
Added features, improvements and bug fixes. Check the Seq’s currently installed firmware version on the splash screen at startup. Before commencing the update read the installation instructions text file attached in the archive. Important – when flashing, connect the Seq to the computer using the USB cable only, with AC adapter disconnected! Otherwise, you’ll brick it. If this happens, don’t sweat, just reflash the bricked Seq on the USB power only.
Changelog
2.2.6
Changes from 2.0 to 2.2.6
- The MIDI transport was behaving strangely in certain circumstances, not anymore.
- Fixed issue where note offsets (nudges) recorded from external controllers were not working properly.
- Added compatibility with the new Polyend Seq Tool for firmware flashing and pattern dump/load functionality.
- The issue with populating a track with the use of the Roll knob causing that the manually added steps were muted is now fixed.
- Notes incoming from the external controller over MIDI input are not being automatically transmitted to all MIDI outputs (DIN, USB) anymore as it was causing a lot of conflicts.
- In certain circumstances the Seq was getting out of sync when externally clocked, this was fixed.
- Overall stability enhancements.
2.0
Changes from 1.0 to 2.0
- Added Random roll Velocity Curve.
- The start button resets the cue point for all the tracks.
- All the previous user-reported bugs are now removed.
- The increased refresh rate for the incoming MIDI signals.
- New rolls behaviour, they work on the whole length of a step now.
- Toggle on/off of a step with roll attached won’t lose the roll parameter anymore.
- Unstable behaviour while on an external MIDI clock in the first phrase was fixed.
- Added per track step retrigger – click and hold down the Move knob and indicate the step/s on a track/s you want to retrigger from.
- Added roll Note Curve – each step in the roll’s length will trigger notes in a scale set to the particular track – Flat, Inc, Dec, Inc-Dec, Dec-Inc, Random.
- New Tempo knob functionality. Used with a track button gives access to a per-track tempo divider/multiplier, MIDI channel input, MIDI channel output, MIDI output source (two last positions moved from the Note knob section).
Manuals
Name
Version